While getting stuff together to repair a Mosin Nagant Finnish M39 rifle that has a crack originating in the wood right behind the magazine housing and extending out of one side of the wrist I decided cross pins may be benificial. Brownells as industrious as they are wanted a little much ($24) for a handful of brass 3/32 threaded cross pins and a drill bit. My local ACE hardware had 3/32 brass rod for under $2 and I only used about 1/4 of the stick for my repair pins.
|
Threaded rod pulls stock pieces together and holds repair epoxy to help ensure a good repair. |
I planned on using acraglas to repair the stock, threaded cross pins paired with acraglas should make a pretty bomb proof stock afterwards. To thread the 3/32 rod I just chucked a section of the rod in a cordless drill and ran it in a 4-40 die at a manageable speed. Saved $22 woot! Stock repair pictures to come soon.
|
Rod being threaded |
|
Little pressure is required to get the thread started. |
No comments:
Post a Comment
If you have an issue with something I have written please email me at wonderwolf@gmail.com Do not start any mud throwing as you will quickly learn I don't tolerate rudeness. Keep things clean as I want people of all ages to enjoy these pages.